Table of Contents
Advertisement
3.6 M.2 SSD Installation
The X11SDW-16C-TP13F+/X11SDW-14CN-TP13F+ supports three M.2 SSD connectors. To
install an M.2 SSD, first locate the connector and the standoff on the motherboard.
1. Remove the screw from the standoff and set aside.
2. Remove the old M.2 SSD drive.
3. Insert a new M.2 SSD into the slot.
4. Align the cutoff circle with the standoff.
5. Reinstall the screw on the standoff.
Note: The illustration shows the M.2 22110 card. Follow the same procedure to install the
M.2 3042 and 2230 cards in their respective slots.
Chapter 3: Maintenance and Component Installation
3
Figure 3-6. Installing an M.2 SSD
39
4
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperServer SYS-E403-9D-16C-IPD2 and is the answer not in the manual?