Preparing For Setup; Pole Mounting Requirements; System Precautions - Supermicro SuperServer SYS-E403-9D-16C-IPD2 User Manual

SuperServer SYS-E403-9D-16C-IPD2/E403-9D-14CN-IPD2 User's Manual
•
Do not topple the system while in transport or storage.
•
Please keep children away from the system.

2.2 Preparing for Setup

Pole Mounting Requirements

Manpower: Two people. Weight of system is 46kg (101lbs.)
Tools: Adjustable wrench with diameter 3/4 (19mm)
Phillips and flathead screwdrivers
Measuring tape
Surge protection devices (SPD)
Outdoor shielded dual-conductor cable (12 AWG)
Outdoor grounding wire (6 AWG)
Marking pen
316L stainless hose clamp, 15mm or wider (optional)

System Precautions

•
Review the electrical and general safety precautions in Appendix B.
•
When not servicing, always keep all covers/panels on the server closed. These must be
in place to allow for proper airflow and to prevent overheating.
•
Keep a one-foot (30cm) clearance from the ground to provide sufficient airflow for cabinet
cooling.
•
Only install the system on a pole with a diameter of between 5" and 10".
•
Ensure that the pole is capable to withstand the weight of the system before installation.
•
Various pole types and materials are regulated in different regions, please refer to local
regulations before mounting the system on a pole.
•
Keep a four-foot (122cm) clearance around the pole to provide operating space.
•
Use only the designed components and fasteners; using alternative components will invoke
unpredictable risk.
•
If surface paint becomes scratched or chipped off, touch it up with outdoor-use paint
18