Supermicro SuperServer SYS-E403-9D-16C-IPD2 User Manual page 93

Chapter 6: UEFI BIOS
MMCFG Base
Use this feature to select the low base address for PCI-E adapters to increase base memory.
The options are 1G, 1.5G, 1.75G, 2G, 2.25G, and 3G.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The default option, Vendor
Defined Firmware, is pre-installed on the drive and may resolve errata or enable innovative
functions for the drive. The other option, AMI Native Support, is offered by the BIOS with a
generic method. The options are Vendor Defined Firmware and AMI Native Support.
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
Consistent Device Name Support
Select enabled for the BIOS to consistently name network devices. The options are Disabled
and Enabled.
JMD2: M.2-H PCI-E 3.0 X2 lane 1 Type
Use this feature to select the I/O type for this slot. The options are PCIE and USB 3.0.
JMD1: M.2-H PCI-E 3.0 X4 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
JMD2: M.2-H PCI-E 3.0 X2 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
JMD3: M.2-P PCI-E 3.0 X1 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
RSC-R1UW-2E16 SLOT1 PCI-E 3.0 X16 OPROM (Option RISER Card)
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
RSC-R1UW-2E16 SLOT2 PCI-E 3.0 X16 OPROM (Option RISER Card)
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
93