Chapter 3 Maintenance And Component Installation; Removing Power - Supermicro SuperServer SYS-E403-9D-16C-IPD2 User Manual

SuperServer E403-9D-16C-IPD2/E403-9D-14CN-IPD2 User's Manual
Maintenance and Component Installation
This chapter provides instructions on installing and replacing main system components. To
prevent compatibility issues, only use components that match the specifications and/or part
numbers given.
Installation or replacement of most components require that power first be removed from the
system. Please follow the procedures given in each section.

3.1 Removing Power

Use the following procedure to ensure that power has been removed from the system.
1. Use the operating system to power down the system.
2. After the system has completely shut down, disconnect the power from the power
source.
3. Disconnect the power cord from the server.
Chapter 3
30