Table of Contents
Advertisement
3.10 Server Cooling
Server Fans
The B403-IP65 includes three hot-swappable 80-mm fans. The figure below demonstrates
how to remove a fan. The top cover does not need to be removed for this operation.
Installing or Replacing the Server Fan
1. Access the fans as described in Section 3.2. Do not remove the server cover.
2. Press the latch at the side of the fan.
3. Pull up the fan by the two side handles.
4. If replacing a fan, insert the new fan.
5. Close the chassis fan cover and tighten the two thumbscrews.
Fan Latch
Chapter 3: Maintenance and Component Installation
Figure 3-12. Server Fans
45
Advertisement
Table of Contents
