Table of Contents
Advertisement
2.1 Overview
T h i s
c h a p t e r
SYS-E403-9D-16C-IPD2/E403-9D-14CN-IPD2 to a pole. If your system is not already fully
integrated with system memory etc., refer to Chapter 3 for details on installing those specific
components.
Warnings
•
Installation work and electrical wiring must be done by qualified person(s) in accordance
with all applicable codes, standards and national wiring regulations.
•
Use this unit only in the manner intended by the manufacturer. If you have questions,
please contact the manufacturer.
•
Install the system in accordance with the instructions in this installation manual. Improper
installation may result in electrical shock or fire.
•
Make sure that all wiring is secured, the specified wires are used, and there is no strain
on the terminal connections or wires.
•
Before serving or cleaning the unit, turn the power off and disconnect the power supply.
•
Be sure to use only the specified accessories and parts for installation work.
•
The system shall be not accessible to the general public.
•
The product must be fixed in place before operation.
Caution
•
Do not place any objects on/in the system.
•
Do not block air inlets or outlets and do not touch the air inlets, outlets, or aluminum fins
of the unit.
•
Do not install the system in any place where there is a danger of flammable gas leakage.
•
Be aware of any potential risks when installing, inspecting, maintaining, or repairing the
system.
Chapter 2
System Installation
p r o v i d e s
a d v i c e
Chapter 2: System Installation
a n d
i n s t r u c t i o n s
17
f o r
a t t a c h i n g
t h e
Advertisement
Table of Contents
