Wall Mounting; Controller Cover - ICP DAS USA WinCon 8000 Hardware User Manual

5.3 Wall Mounting

5.4 Controller cover

For safety and controller setting memo, WinCon8000 provides a main
controller cover to protect the reset push button to be applied under the
uncontrolled situation. And it also offers a expansion slot setting record area
and others configuration memo area. The operation procedure is as below:
Step 1: Use hand to push the main controller cover and then pull-down the cover.
Step 2: Open the cover, as shown in the below figure.
The Expansion I/O setting record is right on the main controller unit. And the
memo area is on the inside cover, as shown in below. Note that the reset key
is on the right-up corner protected by the controller cover.
WinCon8000 Series Hardware user's Manual, July/2005, v1.1 ----- 17