Compiling & Simulating The Example Project; 1: Compiling The Ld Project - ICP DAS USA ISaGRAF PAC Series Getting Started

4.2 Compiling & Simulating the Example Project
Note: In order to ANY and EVERY ISaGRAF program to work properly inside the ISaGRAF PAC
Series systems, the programmer should be responsible for selecting the correct
"Compiler Options". You MUST select the "ISA86M: TIC Code For Intel" option as
described below.
First, click the main menu [Make] > [Compiler Options].
Make sure you have selected the following three necessary options in the "Compiler
Options" window, and press "OK" button to complete the setting.

4.2.1: Compiling the LD Project!

Now, you have selected the proper compiler options, please click on the "Make
Application Code" button to compile the example LD project. If there is no compiler
errors detected during the compilation process, CONGRATULATIONS, you have
successfully created our example LD program.
4-15 .
When using "Variable Array",
and 9th Optimizer options. Recommend to checked only the 1st -
"Run two optimizer passes" option.
Getting Started: PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011
Make sure to
select this three.
DO NOT
checked the 2nd, 7th, 8th
ICP DAS