Oil Life Reset - RAM 2500 2020 Owner's Manual

Up Arrow Button

Push and release the up arrow
button to scroll upward through the
main menu items, submenu
screen, and vehicle settings.
Down Arrow Button

Push and release the down arrow
button to scroll downward through
the main menu items, submenu
screen, and vehicle settings.
Right Arrow Button

Push and release the right arrow
button to access/select the infor-
mation screens or submenu
screens of a main menu item. Push
and hold the right arrow button for two
seconds to reset displayed/selected features
that can be reset.
Left Arrow Button

Push and release the left arrow
button to access/select the infor-
mation screens, submenu screens
of a main menu item, or to return to
the main menu.
O L R
IL IFE ESET
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display in the
instrument cluster display after a single chime
has sounded, to indicate the next scheduled oil
change interval. The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate,
dependent upon your personal driving style.
NOTE:
Use the steering wheel instrument cluster
display controls for the following procedure.
Oil Life Reset Procedure
1. Without pushing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not
start the engine).
2. Push and release the down arrow button to
scroll downward through the main menu to
"Vehicle Info."
3. Push and release the right arrow button to
access the "Vehicle Info" screen, then scroll
up or down to select "Oil Life."
GETTING TO KNOW YOUR INSTRUMENT PANEL
4. Push and hold the right arrow button to
select "Reset".
5. Push and release the down arrow button to
select "Yes," then push and release the
right arrow button to reset the Oil Life to
100%.
6. Push and release the up arrow button to exit
the instrument cluster display screen.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not
start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
115
3