Oil Life Reset - RAM 1500 2WD 2021 Owner's Manual

Up And Down Arrow Buttons:
Using the up or down arrow button allows
you to cycle through the Main Menu Items.
Left And Right Arrow Buttons:
Using the left or right arrow button allows
you to cycle through the submenu items of the
Main menu item.
NOTE:
Holding the up / down or left

right arrow buttons will loop the user
through the currently selected menu or
options presented on the screen.
Main menu and submenus wrap for contin-

uous scrolling.
Upon returning to a main menu, the last

submenu screen viewed within that main
menu will be displayed.
OK Button:
For Digital Speedometer:
Pushing the OK button changes units (mph or

km/h).
For Screen Setup:
OK button allows user to enter menu and

submenus.
Within each submenu layer, the up

down arrow buttons will allow the user to
select the item of interest.
Pushing the OK button makes the selection

and a confirmation screen will appear
(returning the user to the first page of the
submenu).
Pushing the left arrow button will exit each

submenu layer and return to the main menu.
/
O L R
IL IFE ESET
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display in the
instrument cluster display for five seconds after
a single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil
change indicator system is duty cycle based,
which means the engine oil change interval may
fluctuate, dependent upon your personal
driving style.
Unless reset, this message will continue to
display each time you place the ignition in the
ON/RUN position. To turn off the message
temporarily, push and release the OK or arrow
buttons. To reset the oil change indicator
system (after performing the scheduled
maintenance), refer to the following procedure:
GETTING TO KNOW YOUR INSTRUMENT PANEL
and 1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not
start the engine).
2. Push and release the down
to scroll downward through the main menu
to "Vehicle Info."
3. Push and release the right
to access the "Oil Life" screen.
4. Push and hold the OK button to reset oil life.
If conditions are met, the gauge and
numeric display will update to show 100%.
If conditions are not met a pop up message
of "To reset oil life engine must be off with
ignition in run" will be displayed (for five
seconds), and the user will remain at the Oil
Life screen.
5. Push and release the up
arrow button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
115
arrow button
3
arrow button
or down