Oil Life Reset - RAM 2500 2020 Owner's Manual

Hide thumbs Also See for 2500 2020:
Table of Contents

Advertisement

92
GETTING TO KNOW YOUR INSTRUMENT PANEL
Premium Instrument Cluster Display
1 – Instrument Cluster Display Controls
2 – Instrument Cluster Display Screen
The instrument cluster display menu items may consist
of the following:
Speedometer
Vehicle Info
Driver Assist — If Equipped
Fuel Economy
Trip Info
Trailer Tow — If Equipped
Audio
Messages
Screen Set Up
Commercial Settings — If Equipped
The system allows the driver to select information by
pushing the following instrument cluster display control
buttons located on the left side of the steering wheel:
Instrument Cluster Display Control Buttons
Up Arrow Button
Push and release the up arrow button to
scroll upward through the main menu
items, submenu screen, and vehicle
settings.
Down Arrow Button
Push and release the down arrow button
to scroll downward through the main
menu items, submenu screen, and
vehicle settings.
Right Arrow Button
Push and release the right arrow button
to access/select the information screens
or submenu screens of a main menu
item. Push and hold the right arrow button for two
seconds to reset displayed/selected features that
can be reset.
Left Arrow Button
Push and release the left arrow button to
access/select the information screens,
submenu screens of a main menu item,
or to return to the main menu.

OIL LIFE RESET

Your vehicle is equipped with an engine oil change indi-
cator system. The "Oil Change Required" message will
display in the instrument cluster display after a single
chime has sounded, to indicate the next scheduled oil
change interval. The engine oil change indicator system
is duty cycle based, which means the engine oil change
interval may fluctuate, dependent upon your personal
driving style.
NOTE:
Use the steering wheel instrument cluster display con-
trols for the following procedure.
Oil Life Reset Procedure
1. Without pushing the brake pedal, push the ENGINE
START/STOP button and place the ignition to the
ON/RUN position (do not start the engine).
2. Push and release the down arrow button to scroll
downward through the main menu to "Vehicle Info."
3. Push and release the right arrow button to access
the "Vehicle Info" screen, then scroll up or down to
select "Oil Life."
4. Push and hold the right arrow button to select
"Reset".
5. Push and release the down arrow button to select
"Yes," then push and release the right arrow button
to reset the Oil Life to 100%.

Advertisement

Table of Contents
loading

This manual is also suitable for:

3500 2020

Table of Contents