Cp105A Night Arm Station; Tf008 Plug Pack (Tf008) - Bosch ICP-CC408 Installation Manual

ICP-CC408 | Installation Guide | 20.0 Optional Equipment EN | 88

20.11 CP105A Night Arm Station

The night arm station incorporates a panic button
and allows the user to arm and disarm the system in
STAY Mode 1 from a bedroom or sitting room.
Enable the night arm station to operate with the
system by selecting Option 8 in Location 427 (refer
to Section 18.4 System Options 4 on page 80).

20.12 TF008 Plug Pack (TF008)

The TF008 plug pack is used with ICP-CC408
Control Panels. The plug pack includes built-in
thermal fuses that blow during overload or fault
conditions to eliminate a possible fire threat due to
excessive heat buildup inside the casing.
The plug pack incorporates a three-wire flying lead
that enables a MAINS earth connection between the
equipment and the plug pack. This connection might
be required for lightning protection on equipment
connected to phone lines or for safety reasons such as
earthing of metal enclosures.
Bosch Security Systems, Inc. | 12/08 | F01U089463-02