Nortel DMS-100 Series Application Manual page 42

2-18 Startup procedures
Type
>DISPLAY DATE 89 12 02
and press the Enter key.
Indices are displayed in a stepped format that represents their hierarchical
relationship. Basic indices always appear to the far right in a report.
Exception reports are generated by the DISPLAY subcommand when
EXCEPTVAL is set to less than its default values. Exception reports differ
from regular SPMS reports in three ways:
1 An extra line is printed in the report heading, indicating the exception
2 A line of three dots in the report indicates that at least one index at this
3 An index is printed only if its value on one of the last N days (where N is
Figure 2-5 shows part of a sample report obtained by entering the following
sequence of commands:
>SET TREETOPS SERVICE
>SET EXCEPTVAL 800
>DISPLAY 1
297-1001-330 Standard 11.04 June 1998
level and the number of days in the report.
point in the tree has been suppressed.
the selected number of days) or its month-to-date value is less than the
exception value.