Basic Index Cpuicds - Nortel DMS-100 Series Application Manual

Section
CONTROL
Description
Call processing suicides
Definition
The per-attempt occurrence of call processing suicides. These occur when
call processing has encountered severe error conditions, as a result of
software errors, software or hardware problems in peripherals, or datafill
errors.
DMS-100G Switch does not contribute to or provide an equivalent of OM
group OFZ, measurements NIN, and NIN2
Measurement list
CPSUICDS uses measurement CP CPSUIC.
Normalizer
CPSUICDS is normalized per total call attempt on the switch.
Diagnostics
Check the call processing suicide rate using OM CPSUIC in OM group CP.
The problem may be due to software errors, software or hardware problems
in the peripherals, or datafill errors. Analyze system logs SWERR,
AUDT100, AUDT103, AUD103, AUD395, AUD398, or NET101
associated with line 104 and TRK113. Use DISPCALL to aid analysis.
DMS-100 Family Switch Performance Monitoring System Application Guide BASE09 and up
6-103 SPMS MTCEPERF index descriptions

Basic index CPUICDS

6-103 6-103