Nortel DMS-100 Series Application Manual page 26

2-2 Startup procedures
automatically generated reports that are in table OMREPORT. The reports
assigned to table OMREPORT are called OMRS reports.
There are 24 provisionable reports in table OMEREPORT. Only 23 or fewer
can be assigned by the operating company, the remaining are designated the
report name *SPARE*.
Add the SPMS report to the list of automatically generated reports by typing
>TABLE OMREPORT
and pressing the Enter key.
MAP response:
TABLE: OMREPORT
Select a spare report to be assigned the name SPMSREP by typing
>LIST ALL
and pressing the Enter key.
Note: You should see a list of all the reports. Any report identified with
*SPARE* in the DATA field is available for use.
Once you have decided which report to use, position on the tuple associated
with that report and continue as directed in the following steps.
Position on the tuple associated with the report (XX is the tuple/report
number) by typing
>POS XX
and pressing the Enter key.
Change the existing tuple by typing
>CHA
and pressing the Enter key.
MAP response:
ACTIVE:N
Confirm the command by typing
>Y
and pressing the Enter key.
MAP response:
REP:AUTO
297-1001-330 Standard 11.04 June 1998