Basic Index C7Lnksfl - Nortel DMS-100 Series Application Manual
Switch performance monitoring system
Hide thumbs
Also See for DMS-100 Series:
- Replacement procedures (1100 pages) ,
- Maintenance manual (762 pages) ,
- Manual (543 pages)
Table of Contents
Advertisement
6-152
6-152
SPMS MTCEPERF index descriptions
Basic index C7LNKSFL
Section
LINKPERF
Description
CCS7 link synchronization failure
Definition
C7LNKSFL monitors the failure rate of the CCS7 link due to one or more of
the following reasons:
Measurement list
C7LNKSFL uses the sum of measurements C7LKFAIL, C7STALFL,
C7TLALFL, C7NETCON, and C7SLTFL from OM group C7LINK1.
Normalizer
C7LNKSFL is normalized per working CCS7 link per unit time.
Diagnostics
Verify OM group C7LINK1, registers C7LKFAIL, C7STALFL,
C7TLALFL, C7NETCON, C7SLTFL, C7ABNRFB, C7EXDLAY,
C7EXERR, C7EXCONG, and C7ALIGNF.
297-1001-330 Standard 11.04 June 1998
abnormal forward indicator bit Rx (FIBR)
backward sequence number Rx (BSNR)
excessive delay of acknowledgement from the signaling terminal (ST)
excessive duration of congestion (remote congestion timeout)
inability to allocate ST or transmission link
failure to get network connection
failure of signalling link test
6-152
Advertisement
Table of Contents
