Table of Contents
Advertisement
3.2.6 Wide Angle Lens Dewarping
The fisheye source view is curved especially near the edges. Use this function to reduce the
warping of live view.
1. Right-click on the live view to display a drop-down list.
2. Select Wide Angle Setting. The Wide Angle Dewarping Setting window appears.
3. Slide the slider at the bottom to correct the degree of warping. The adjusted view is
shown on the right. Click OK to close this window.
4. To enable this configuration, right-click on the live view, select Wide Angle Lens
Dewarping.
Note: The Wide Angle Lens Dewarping function only applies to the circular source image.
66
Figure 3-12
Advertisement
Table of Contents
