Table of Contents
Advertisement
6.3 Restoring to Factory Default Settings
You can restore the camera to factory default settings using the Web interface or directly on
the camera.
6.3.1 Using the Web Interface
To restore to default settings using the Web interface:
1. In the left menu, select Management and select Tools.
2. Under the System Settings section, click the Load Default button.
6.3.2 Directly on the Camera
1. Use the supplied torx wrench to unscrew and remove the camera cover.
2. Use a pointy object such as the tip of a pen to hold down the Load Default button.
GV-FE2301 / 4301
158
Figure 6-8
System Status LED
Default button
Advertisement
Table of Contents
