Physical Description; Gv-Fe2301 / 4301 And Gv-Fer521 - GeoVision GV-FE2301 User Manual

Introduction
1

1.5 Physical Description

1.5.1 GV-FE2301 / 4301 and GV-FER521

To access the Default button, LED indicators and micro SD card slot, unscrew the screws
indicated below and then remove the camera cover.
Figure 1-1a: GV-FE2301 / 4301 Figure 1-1b: GV-FER521
Note: For GV-FER521, a silica gel bag is attached to the inside of the camera cover. The
silica gel loses effectiveness after you open the camera cover. To prevent the lens from
fogging up, it is highly recommended to replace the silica gel bag every time you open the
camera. To replace the silica gel bag, use the supplied adhesive tape to attach a new silica
gel bag and fasten the camera cover within 2 minutes of opening the silica gel bag
package.
13