GeoVision GV-FE2301 User Manual page 123

1. Activate Link: Enable the connection to the GV-Video Gateway / GV-Recording
Server.
2. Host Name or IP Address: Type the host name or IP address of the GV-Video
Gateway / GV-Recording Server.
3. Port Number: Match the communication port on the GV-Video Gateway / GV-
Recording Server or keep the default value 50000.
4. User Name: Type a valid user name to log into the GV-Video Gateway / GV-
Recording Server.
5. Password: Type a valid password to log into the GV-Video Gateway / GV-Recording
Server.
6. Enable schedule mode: Enable the GV-Video Gateway / GV-Recording Server
connection on the schedule you set in the Select Schedule Time section. Refer to 4.5
Recording Schedule for the same settings.
7. Click Apply. The Connection Status should display "Connected" and the connected
time.
8. To establish the connection to the second GV-Video Gateway / GV-Recording Server,
click the Connection 2 tab and repeat the above steps for setup.
Administrator Mode
4
109