Table of Contents
Advertisement
7.2 Setting Up IP Cameras on GV-VMS
Follow the steps below to manually connect your GV-Fisheye IP Dome to GV-VMS.
Note: The following instructions are based on V14.10 software and user interfaces.
1. To access the IP Device Setup page, click Home
Configure
and select Camera Install.
2. Click Add Camera
3. Type the IP address, username and password of the camera. Modify the default HTTP
port 80 if necessary.
Figure 7-7
. This dialog box appears.
Figure 7-8
DVR Configurations
7
, select Toolbar
, click
175
Advertisement
Table of Contents
