Wireless Client Mode - GeoVision GV-FE2301 User Manual

4.7.2 Wireless Client Mode

Note this function is only supported in GV-FE3402 / 3403 / 5302 / 5303 and GV-FER12203
when GV-WiFi Adapter is installed. Set up the client mode before enabling the wireless
function.
Network type: Select the network mode Ad Hoc or Infrastructure.
Infrastructure: Connect to the Internet via the Access Point. This mode further gives
wireless access to the Internet or data sharing under a previously wired environment.
Ad-Hoc: A Peer-to-Peer mode. This mode connects to other computer with the
WLAN card, and does not need the Access Point to connect to each other.
Network name (SSID): The SSID (Service Set Identify) is a unique name that identifies a
particular wireless network. Type SSID of the Wireless LAN group or Access Point you
are going to connect to.
Access Point Survey: Click this button to search all the available Access Points
(Infrastructure mode) and wireless stations (AD-Hoc mode) within the LAN.
Authentication Type: Select one of these network authentication and data encryption:
Disable, WEP, WPAPSK-TKIP, WPAPSK-AES, WPA2PSK-TKIP or WPA2PSK-AES.
Disabled: No authentication is needed within the wireless network.
Figure 4-25
Administrator Mode
4
119