Table of Contents
Advertisement
4.3.8 RTSP/ONVIF
The RTSP Server enables RTSP protocol for video streaming.
[RTSP]
Activate Link: Enable the RTSP protocol.
RTSP/TCP Port: Keep the default value 8554, or modify it if necessary.
RTP/UDP Port: Keep the default range from 17300 to 17319, or modify it if necessary.
The number of ports for use is limited to 20.
Max Connection: Set the maximum number of connections to the camera. The
maximum value is 8.
Enable Audio: Turns audio streaming on or off.
Disable Authentication: Note this option is not supported by GV-FE2301 / 4301
(firmware version 1.10 or earlier) and GV-FER521 (firmware V1.10 or earlier). By default,
when accessing live view through RTSP command, the ID and password of the camera
are required. Select this option to disable the authentication prompt.
For details on the RTSP command, see RTSP Protocol Support in Appendix B.
Figure 4-20
Administrator Mode
4
111
Advertisement
Table of Contents
