Table of Contents
Advertisement
The following steps are the example of manual setup.
2.
Click Add Camera. This dialog box appears.
Figure 7-3
3.
Type the IP address, username and password of the camera. Modify the default HTTP
port if necessary. Select GeoVision from the Brand drop-down list and select the model
from the Device drop-down list. This dialog box appears.
4.
Click Query to acquire the information from the IP camera. You can change the video
streaming port number if needed.
5.
Click Apply. The IP camera is added to the connection list.
172
Figure 7-4
Advertisement
Table of Contents
