Table of Contents
Advertisement
2.1.3 Configuring the Wireless Connection
Wireless settings are only applicable to GV-FE3402 / 3403 / 5302 / 5303 and GV-FER12203.
Insert a WiFi adapter to the camera and follow the steps below to set up a wireless connection
to your camera.
1. To set up the wireless LAN for the first time, power on and connect a standard network
cable to the camera.
2. An IP address will be automatically assigned to the camera. Use GV-IP Device Utility to
search for the device. For details, see 2.1.1 Checking the Dynamic IP Address.
3. Configure the wireless settings.
A. On the Web interface, select Network, select Wireless and Client Mode. This dialog
box appears.
B. Type the Network Name (SSID) or click the Access Point Survey button to search and
select for the available Access Points/wireless stations.
C. Select Ad-Hoc or Infrastructure for the Network type.
D. Select the Authentication Type using the drop-down list. You can also obtain this
information by clicking the Access Point Survey button.
E. Type the WPA-PSK Pre-shared Key or WEP depending on the encryption setting for
the Access Point.
48
Figure 2-5
Advertisement
Table of Contents
