Table of Contents
Advertisement
5. On the back side, make sure the black plastic clips are slightly above the ceiling board
and pointing outward.
Figure 1-30
6. From the front side of the camera, tighten the screws.
Figure 1-31
7. Connect the camera with power, network and other wires. For details, see 1.7
Connecting the GV-Fisheye Camera.
8. Place the camera cover for in-ceiling mount on top of the camera and tighten the 3
screws or just put on the in-ceiling cover if it does not contain screws.
Figure 1-32
Introduction
1
31
Advertisement
Table of Contents
