Table of Contents
Advertisement
Manual close channel: Closes the triggered camera view manually.
Close the camera view when motion stopped: Closes the triggered camera view
automatically when motion stops.
Post Motion: Specify the duration of the camera view remaining on the monitoring
window after motion stops.
Camera send by I/O trigger will monitor: Specify the duration of the camera view
remaining on the monitoring window when an I/O device is triggered.
To keep the camera view remaining on the monitoring window even after the alarm is
finished, click the right-arrow button, and uncheck Latch Trigger. Then the camera view will
keep remaining on the monitoring window for the specified time. For example, the alarm is
triggered for 5 minutes and you set 10 minutes, which means the total display time will be 15
minutes.
For further information on how to manage the video received from the camera, see GV-CMS
Series User's manual.
CMS Configurations
8
183
Advertisement
Table of Contents
