GeoVision GV-FE2301 User Manual page 37

d. Move the components toward the RJ-45 connector, secure item 1 to the Rubber
Seal Ring of the camera data cable and secure item 2 to item 1 tightly.
Figure 1-11
IMPORTANT: Item 1 must be secured tightly to waterproof the cable.
6. For GV-Fisheye Camera that does not come with an IR LED ring, place the camera cover
(for hard ceiling mount) on top of the camera and tighten the screws with the supplied
torx wrench.
Figure 1-12
7. For GV-Fisheye Camera with an IR LED ring, follow the steps below to secure the IR
LED ring to the camera.
A. Secure the safety lock to the camera. Then secure the camera cover.
Figure 1-13
Introduction
1
23