3.2.2 Fisheye View
To enable the fisheye options, right-click the live view and select Geo Fisheye. Right-click
the image again and select Fisheye Option to see the following options.
Image Alignment: By default, the image should be properly aligned already. If not,
follow the steps below to align the image for each model:
GV-FE3402 / 3403 / 5302 / 5303 and GV-FER3402 / 3403 / 5302 / 5303 / 12203:
Align the red circle with the outer edge of the camera image, and then align it with
the inner edge of the image frame to achieve optimal results.
GV-FE2301 / 4301 and GV-FER521: Align the red circle with the edge of the
camera image. You can eliminate the darker areas toward the edge of the image by
making the red circle smaller, but the field of view will be slightly reduced.
Figure 3-6 When GV-FE2301 / 4301 images are aligned, all four edges will be cropped
slightly.
Figure 3-5
Accessing the Camera
3
57