Table of Contents
Advertisement
1.5.4 GV-FER12203
1
2
No.
Name
1.
Microphone
2.
Status LED
3.
Data Cable Connector
4.
Lens
5.
Micro SD Card Slot
6.
Default Button
7.
LAN / PoE Connector
8.
LAN / PoE
Note:
1.
The micro SD card slot is currently not functional.
2.
A silica gel bag is attached under the LAN / PoE port. The silica gel loses
effectiveness after you open the camera cover. To prevent the lens from fogging up, it
is highly recommended to replace the silica gel bag every time you open the camera.
To replace the silica gel bag, use the supplied adhesive tape to attach a new silica gel
bag and fasten the camera cover within 2 minutes of opening the silica gel bag
package.
3
Figure 1-6
Function
Receives the sound from the camera.
Flashes when the camera is powering on and loading
default settings.
Waterproofs the data cable.
Receives image inputs.
Currently not functional.
Resets all configurations to default factory settings. See
6.3 Restoring to Factory Default Settings.
Waterproofs the Ethernet cable.
Connects to a 10/100/1000 Ethernet or PoE.
Introduction
1
4
5
6
7
8
19
Advertisement
Table of Contents
