Table of Contents
Advertisement
4.1.6 Visual Automation
This intuitive feature helps you automate any electronic device by triggering the connected
output device. When you click on the image of the electronic device, you can change its
current state, e.g. turning the light on.
Note: Visual Automation settings are only supported by GV-FE2301 / 4301 and GV-
FER12203.
1. Select the Enable option.
2. Drag an area on the image of the electronic device. This dialog box appears.
Figure 4-10
3. Assign the connected module and output device. In the Note filed, type a note to help
you identify the device. Click OK to save the settings.
4. To change the frame color of the set area, click the Set Color button.
5. To emboss the set area, select Float Up; or keep it flat by selecting Normal.
6. Click the Save Set button to apply the settings.
To perform the function, see 3.2.15 Visual Automation.
94
Figure 4-9
Advertisement
Table of Contents
