In-Ceiling Mount - GeoVision GV-FE2301 User Manual

1.6.2 In-Ceiling Mount

In-Ceiling Mount allows the camera to be mounted into the ceiling, revealing a small portion
of the camera. In-Ceiling Mount requires the ceiling board to be between 0.5 – 3.0 cm (0.2 –
1.18 in) thick.
Figure 1-26
Note: In-ceiling mount is not applicable to the models with IR LED ring (GV-FE3403 / 5303
and GV-FER3403 / 5303) and GV-FER12203.
1. Place the installation sticker on the ceiling board, and cut the circle part out of the ceiling.
To install GV-FE3402 / 5302 and GV-FER3402 / 5302, drill the 3 holes indicated as
"Device".
Figure 1-27
Introduction
1
29