Events And Alerts; Input Settings - GeoVision GV-IP LPR-DL User Manual

3.5 Events and Alerts

This section covers the event and alert settings of the camera, including I/O Settings,
Tampering Alarm and LPR Settings.

3.5.1 Input Settings

[Digital Input 1/2] Before configuring, make sure the desired input device has been properly
connected to the digital input of the camera, see 1.6.2 External Wiring.
To activate the sensor input, select Enable.
Normal State: You can set the input state to trigger actions by selecting Open Circuit

(N/O) or Grounded Circuit (N/C).
Latch Mode: Enable this option to have a momentary output alarm.

Trigger digital output relay: When this option is enabled, the output will be triggered

once the input is activated.
Trigger Day/Night Mode: Enable to switch between day/night mode when the input is

triggered.
Send Video to Center V2: Enable this option to send the images to Center V2 when the

input is triggered.
Note: For input triggers to work, I/O monitoring must be enabled, either manually or by
schedule. See 3.7 Monitoring and 3.5.3 I/O Schedule for details.
3 Administrator Mode
61