Reference Manual
2-3-9000-744
Wire customer externally-powered analog outputs
It is possible to furnish power to each analog output while maintaining isolation between
channels.
Procedure
Use
Figure 4-32
between channels.
Figure 4-32: Wiring for customer-powered analog outputs
A. Backplane
B. Customer devices
C. Analog outputs
D. Inputs
Figure 4-32
output (I/O) board, that are necessary to provide power to each analog output while
maintaining isolation between channels.
Rosemount 700XA
to provide power wiring to each analog output while maintaining isolation
shows the settings for the analog outputs switches, located on the base input/
Installation and start-up
June 2022
91