Emerson Rosemount 700XA Reference Manual page 237

Reference Manual
2-3-9000-744
Table A-5: Detector screen fields
Detector Screen
Field Names
Flame Ignition
Ignition Attempts
Wait Time Bet Tries
Igniter On Duration
Flame On Sense Temp
Flame Out Sense Temp
FPD Flame Status DI
Scaling Factor
Flame Temp
The Detector screen field label names and their respective field statuses are described as
editable or non-editable depending on G1/G2 board types.
When you select one of the buttons on G1 boards (for example, Auto-zero), then since FID
and µFPD are both enabled for Auto-zero, when that button is selected a combo box
displays for you to select either FID or µFPD detector (if both detector types are configured
with the gas chromatograph [GC]). After selecting one of the detectors, the Auto-zero
event is triggered for that detector.
For G2 boards, since the µFPD is disabled for Auto-zero no combo box displays for you to
select the detector. Only one detector is a valid selection for Auto-zero in the available
detectors on that GC, so the Auto-zero selection triggers the event for the FID detector. If
the button option is valid for more than one detector type, only then does the combo box
display. If only one detector type is valid for that specific button, then the combo box does
not display and the selection triggers that specific event on the only workable detector.
Table A-6: Detector screen Auto-zero buttons
Button Name G1 Board
FID
Auto-Zero Enabled
Rosemount 700XA
(continued)
G1 Board
Flame
Flame ionization photometric
detector (FID) detector (FPD)
Selectable Blank
Editable Blank
Editable Blank
Editable Blank
Editable Blank
Editable Blank
Blank Selectable
Read only Read only
Read only Blank
FPD
Enabled
Local operator interface (LOI)
G2 Board
FID
Selectable
Editable
Editable
Editable
Editable
Editable
Blank
Read only
Read only
G2 Board
FID FPD
Enabled Disabled
June 2022
FPD
Selectable
Editable
Editable
Editable
Editable
Editable
Blank
Blank
Read only
237