Emerson Rosemount 700XA Reference Manual page 87

Reference Manual
2-3-9000-744
Figure 4-28: Optional in/out (I/O) expansion card slots
A. Optional card slots
Wire a ROC800 AI-16 module
NOTICE
Electrostatic discharge (ESD)
Operators and technicians must wear an electrostatic wrist strap when handling printed
circuit cards to prevent shorting the boards through static electricity. Do not install or
remove the printed circuit assemblies while power is applied to the device. Keep electrical
components and assemblies in their protective (conductive) carriers or wrapping until
ready for use. Use the protective carrier as a glove when installing or removing printed
circuit assemblies.
Rosemount 700XA
Installation and start-up
June 2022
87