Emerson Rosemount 700XA Reference Manual page 44

Getting started
June 2022
2. Retain the shipping information.
3. Inspect all parts and assemblies for possible shipping damage.
4. If any parts or assemblies appear to have been damaged in shipment, first file a
5. Next, complete a full report describing the nature and extent of the damage and
6. Only proceed to install and start up the GC if all required materials are on hand and
7. If your GC is configured with an flame ionization detector (FID) or flame
44
Note
The Rosemount MON2020 version number is located on the back of the USB
card.
claim with the carrier.
forward this report immediately to your Emerson Customer Care representative.
Include the GC's model number in the report.
Emerson will provide disposition instructions as soon as possible. If you have any
questions regarding the claim process, contact your Emerson Customer Care
representative for assistance.
free from obvious defects.
photometric detector (FPD), remove the vent plug from the FID/FPD outlet.
NOTICE
The vent plug has a tag attached to it that reads: REMOVE VENT PLUGS PRIOR TO
OPERATION. Failure to remove the cap could result in a performance failure or
damage to the detector.
Reference Manual
2-3-9000-744
Emerson.com/Rosemount