Emerson Rosemount 700XA Reference Manual page 176

Operation and maintenance
June 2022
Connect the GC's F
segment
The F
middle card in the stack. This terminal can be used to connect to a fieldbus segment.
Figure 5-60: Carrier board showing connector at TB1
To connect to a fieldbus segment, do the following:
Procedure
1. Attach one end of a wire to 1 on the TB1 terminal and to the positive (+) terminal on
2. Attach one end of a wire to 2 on the TB1 terminal and to the negative (-) terminal on
176
OUNDATION
Fieldbus module has a terminal at TB1 on the carrier board, which is the
OUNDATION
the fieldbus segment.
the fieldbus segment.
™
Fieldbus module to a Fieldbus
Reference Manual
2-3-9000-744
Emerson.com/Rosemount