Reference Manual
2-3-9000-744
2. Use a large flathead screwdriver to tighten the two µFPD PMT module bracket
3. Use a Phillips head screwdriver and tighten the two screws to attach the stream
4. Attach the J6, J10, and J2 wire terminals to the µFPD PMT module.
Rosemount 700XA
screws.
solenoid manifold.
Figure 5-35: µFPD PMT module connections
A. J6 - CAN and power signals
B. J10 - igniter
C. J2 - thermocouple
D. USB connector
E. PMT module bracket screws
F. Stream manifold screws
G. Stream manifold
Operation and maintenance
June 2022
149