Emerson Rosemount 700XA Reference Manual page 68

Installation and start-up
June 2022
68
c) Check to see if the GC's central processing unit (CPU) board link lights are
on.
See Figure 4-12. The three Ethernet1 LEDs are located on the front
bottom edge of the card. If link lights are off, check your connections.
Figure 4-12: CPU board link lights
A. CPU board
B. Ethernet link lights
4. Do the following to ensure that your network adapter is enabled:
a) Go to Start → Control Panel → Network Connections....
b) Check the status of the Local Area Connection icon. If the status appears
as Disabled, right-click the icon and select Enable from the context
menu.
5. Do the following to try to repair the network connection:
a) Go to Start → Control Panel → Network Connections....
b) Right-click the Local Area Connection icon and select Repair from the
context menu.
Reference Manual
2-3-9000-744
Emerson.com/Rosemount