A 3 Sensortool Software - MICRO-EPSILON optoCONTROL 1200 Operating Instructions Manual

Appendix | sensorTOOL Software
A 3 sensorTOOL Software
In order to save measured data in a csv file, use the sensorTOOL program.
The sensorTOOL program gives you documented software that can be used for setting the sensors, for demonstration purposes, or
for quick visualization of the measurement data. The sensorTOOL program is available online at
load/software/sensorTOOL.exe.
Start the sensorTOOL program.
In the drop-down menus, select the Interfaces sensor group, and for Sensor type, select IF1032/ETH.
Click on the button
All available channels will now be displayed in the Search Results (x)
Fig. 16 First interactive site after calling the sensorTOOL
Click on the button Open Website to make further
A 3.3.
optoCONTROL 1200/1201
with the magnifying glass icon.
settings, see A 3.1
https://www.micro-epsilon.com/down-
overview, see Fig. 16.
and to start the data acquisition in the
sensorTOOL, see
Page 75