Table 23: Auto Provision Settings; Figure 55: Auto Provision Settings - Grandstream Networks UCM630 Series User Manual

Enable Zero Config
Enable Automatic
Configuration Assignment
Auto Assign Extension
Zero Config Extension
Segment

Figure 55: Auto Provision Settings

Table 23: Auto Provision Settings

Enable or disable the zero-config feature on the PBX. The default setting
is enabled.
By default, this is disabled. If disabled, when SIP device boots up, the
UCM630X will not send the SIP device the URL to download the config file
and therefore the SIP device will not be automatically provisioned by the
UCM630X.
Note:
When disabled, SIP devices can still be provisioned by manually sending
NOTIFY from the UCM630X which will include the XML config file URL for
the SIP device to download.
If enabled, when the device is discovered, the PBX will automatically
assign an extension within the range defined in "Zero Config Extension
Segment" to the device. The default setting is disabled.
Click on the link "Zero Config Extension Segment" to specify the extension
range to be assigned if "Automatically Assign Extension" is enabled. The
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 88