Configure Announcement Paging; Table 81: 1-Way Paging Configuration Parameters; Figure 160: Announcement Paging - Grandstream Networks UCM630 Series User Manual

Name
Type
Extension
Replace Display Name
Maximum Call Duration
Custom Prompt
Members
Paging/Intercom
Whitelist

Configure Announcement Paging

Table 81: 1-way Paging Configuration Parameters

Configure paging/intercom group name.
Select "1-way Paging".
Configure the paging/intercom group extension.
If enabled, the UCM will replace the caller display name with Paging/Intercom
name.
Specify the maximum call duration in seconds. The default value 0 means no
limit.
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on 'Prompt', it will direct the users to upload the customized voice
prompts.
Note: Users can also refer to the page PBX SettingsVoice PromptCustom
Prompt, where they could record new prompt or upload prompt files.
Select available users from the left side to the paging/intercom group member
list on the right.
Select which extensions are allowed to use the paging/intercom feature for this
paging group.

Figure 160: Announcement Paging

UCM630X Series User Manual
Version 1.0.2.25
P a g e | 251