Auto Answer; Zone Settings - Grandstream Networks GSC3570 User Manual

Wi-Fi
Tap on "Wi-Fi" to turn on/off Wi-Fi connection. By default, it is turned off.
Add Network. If the Wi-Fi network SSID doesn't show up in the list, or users would like to set up advanced options for
the Wi-Fi network, roll to the end of the Wi-Fi list and select "Add Network". Then Enter SSID, Security type, password and
set up address type (DHCP/Static IP) in the prompt dialog. The phone will reboot with Wi-Fi network connected.
General Networking Settings
This feature is implemented based on request for customers in field, to help system administrators or customers to configure
and adjust the VLAN parameters conveniently from touch screen.
Features
In this menu, users can configure different features related to each account of the active accounts:
Auto-Answer
If Enabled and set to "Always", the phone will automatically turn on the speaker phone to answer all incoming calls.
If enabled and set to "Enable Intercom/Paging", the phone will answer the call based on the SIP info header sent from the
server/proxy.
By default, it is turned off.
DND
Enable/Disable the DND mode. When enabled, all incoming calls are rejected.
Arming mode
Enable/Disable the Arming mode on configured zones (Zone 1- 4) per profile (Outdoor, Indoor, Sleeping or Custom.)
The zones are configured under

Zone Settings

Tap the zone to be edited and set Zone Name, Zone Type along with the alarm type...Etc.
Zone Name: Enter the name of the zone.
Zone Type: Select the Type of the Zone:
Infrared
Smoke
Gas
Dragnets (door lock)
Urgency
Others
NO/NC: Match the alarm type:
NO: Normally Open device
NC: Normally Close device
Alarm Type: Select the Type of the Alarm arming:
Delay Alarm: Enter the Enter Delay/Exit Delay (Duration between 0-60 seconds)
Settings�� Zone Settings.