Table 79: Multicast Paging Configuration Parameters - Grandstream Networks UCM630 Series User Manual

Name
Type
Extension
Multicast IP Address
Maximum Call Duration
Custom Prompt
Multicast IP Address
Port

Table 79: Multicast Paging Configuration Parameters

Configure paging/intercom group name.
Select "Multicast Paging".
Configure the paging/intercom group extension.
The allowed multicast IP address range is 224.0.1.0 - 238.255.255.255.
Note: This field appears only when "Type" is set to "Multicast Paging".
Specify the maximum call duration in seconds. The default value 0 means no
limit.
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on 'Prompt', it will direct the users to upload the customized voice
prompts.
Note: Users can also refer to the page PBX SettingsVoice PromptCustom
Prompt, where they could record new prompt or upload prompt files.
Select which extensions are allowed to use the paging/intercom feature for this
paging group.
Specify port for multicast paging.
Note: This field appears only when "Type" is set to "Multicast Paging".
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 248