Static Routes; Table 7: Ucm630X Network Settings802.1X; Table 8: Ucm630X Network SettingsStatic Routes - Grandstream Networks UCM630 Series User Manual

802.1X Mode
Identity
MD5 Password
802.1X CA Certificate
802.1X Client
Certificate

Static Routes

The UCM630X provides users static routing capability that allows the device to use manually configured routes,
rather than information only from dynamic routing or gateway configured in the UCM630X Web GUISystem
SettingsNetwork SettingsBasic Settings to forward traffic. It can be used to define a route when no other
routes are available or necessary, or used in complementary with existing routing on the UCM630X as a failover
backup, etc.

Click on "Add IPv4 Static Route" to create a new IPv4 static route or click on "Add IPv6 Static Route" to
create a new IPv6 static route. The configuration parameters are listed in the table below.

Once added, users can select

Select to delete the static route.
Destination
Subnet Mask
Table 7: UCM630X Network Settings802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X mode
are:

EAP-MD5

EAP-TLS

EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode Identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
Select 802.1X client certificate from local PC and then upload.
to edit the static route.
Table 8: UCM630X Network SettingsStatic Routes
Configure the destination IPv4 address or the destination IPv6 subnet for the
UCM630X to reach using the static route.
Example:
IPv4 address - 192.168.66.4
IPv6 subnet - 2001:740:D::1/64
Configure the subnet mask for the above destination address. If left blank, the
default value is 255.255.255.255.
Example:
255.255.255.0
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 51