Conference Call Operations; Join A Conference Call; Invite Other Parties To Join Conference; Figure 125: Conference - Grandstream Networks UCM630 Series User Manual

DSP Silence Threshold
Users can check the talking Caller IDs in conference control page (UCM WebUICall FeaturesConference).
The image will move up and down when the user is talking.

Conference Call Operations

Join a Conference Call

Users could dial the conference room extension to join the conference. If password is required, enter the
password to join the conference as a normal user, or enter the admin password to join the conference as
administrator.

Invite Other Parties to Join Conference

When using the UCM630X conference room., there are two ways to invite other parties to join the conference.

Invite from Web GUI.
For each conference room in UCM630X Web GUICall FeaturesConference, there is an icon
option "Invite a participant". Click on it and enter the number of the party you would like to invite. Then click on
"Add". A call will be sent to this number to join it into the conference.
The time in milliseconds of sound falling within the what the dsp
has established as base line silence before a user is considered
to be silent. This value affects several operations and should not
be changed unless the impact on call quality is fully understood,
the default value is 2500.

Figure 125: Conference

UCM630X Series User Manual
Version 1.0.2.25
for
P a g e | 210