The UCM6100 administrators may consider securing SIP packets sent across an untrusted network. Using
TLS could be a solution. It will authenticate servers and clients, and then encrypt SIP messages between
the authenticated parties.
TLS can be configured under UCM6100 web GUI->PBX->SIP Settings->TCP/TLS page.
1. Set "TLS Enable" as "Yes" to enable TLS on UCM6100.
2. Configure "TLS Do Not Verify", "TLS Self-Signed CA" and "TLS Cert" properly to achieve basic TLS
authentication and encryption.
TLS Self-Signed CA
This is used when UCM6100 acts as a client, to authenticate the server. If the server the
UCM6100 connecting to uses a self-signed certificate, you should have their certificate installed
TLS
Figure 8: PBX->SIP Settings->TCP/TLS
UCM6100 Security Manual
Page 14 of 23