Figure 20: Ucm6304 Static Route Sample - Grandstream Networks UCM630 Series User Manual

Gateway
Interface
Static routes configuration can be reset from LCD menuNetwork Menu.
The following diagram shows a sample application of static route usage on UCM6304.
The network topology of the above diagram is as below:

Network 192.168.69.0 has IP phones registered to UCM6304 LAN 1 address

Network 192.168.40.0 has IP phones registered to UCM6304 LAN 2 address

Network 192.168.66.0 has IP phones registered to UCM6304 via VPN

Network 192.168.40.0 has VPN connection established with network 192.168.66.0
Configure the IPv4 or IPv6 gateway address so that the UCM630X can reach the
destination via this gateway. Gateway address is optional.
Example:
192.168.40.5 or 2001:740:D::1
Specify the network interface on the UCM630X to reach the destination using the
static route.
LAN interface is eth0; WAN interface is eth1.
UCM6304

Figure 20: UCM6304 Static Route Sample

UCM630X Series User Manual
Version 1.0.2.25
P a g e | 52