Outbound Blacklist; Figure 105: Country Codes - Grandstream Networks UCM630 Series User Manual

Prepend
Time Condition
Time Condition Mode

Outbound Blacklist

The UCM630X allows users to configure blacklist for outbound routes. If the dialing number matches the blacklist
numbers or patterns, the outbound call will not be allowed. The outbound blacklist can be configured under UCM
Web GUIExtension/TrunkOutbound Routes: Outbound Blacklist.
Users can configure numbers, patterns or select country code to add in the blacklist. Please note that the blacklist
settings apply to all outbound routes.
Specify the digits to be prepended before the call is placed via the trunk. Those
digits will be prepended after the dialing number is stripped.
Use Main Trunk or Failover Trunk: Use the Main Trunk and its settings during the
configured time conditions. If the main trunk is unavailable, the Failover Trunk and
its settings will be used instead.
Use Specific Trunks: Use specific trunks during the configured time conditions.
The Strip and Prepend settings of the Main Trunk will be used. If a trunk is
unavailable during its time condition, no failover trunks will be used.

Figure 105: Country Codes

UCM630X Series User Manual
Version 1.0.2.25
P a g e | 191